Cut True 13M
The Formax Cut-True 13M Tabletop Manual Paper Cutter is rugged and compact with a hardened steel blade and LED Laser Line for precision cutting with minimal effort. Simply load a stack of paper, up to 14.5” wide, secure with the clamp, and pull down on the lever arm; it’s that easy.
The back gauge and calibrated scales allow operators to make fine adjustments, while the Laser Line shows exactly where the blade will cut, making crisp accurate cuts every time.
In addition to accuracy, the Cut-True 13M has a range of safety features including front and rear transparent covers, blade lock, external blade depth adjustment, and easy-to-use blade change safety tool.
Formax Cut-True 13M Spec Sheet
The back gauge and calibrated scales allow operators to make fine adjustments, while the Laser Line shows exactly where the blade will cut, making crisp accurate cuts every time.
In addition to accuracy, the Cut-True 13M has a range of safety features including front and rear transparent covers, blade lock, external blade depth adjustment, and easy-to-use blade change safety tool.
Formax Cut-True 13M Spec Sheet
|
SCS safety features: hinged, transparent safety guard on front table with locking device for the blade lever (a cut can only be executed if the safety guard is completely closed); transparent safety cover on rear table; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers; safety blade lever with patented overload protection.
Patented, lever-activated, fast-action clamp. Lockable back gauge. Precision side guide with measurement scale (mm / inches). High quality, German steel blade. All-metal construction. Optional stand, or cabinet with storage shelves. UL and C UL approved. |
|
Dimensions (D x W x H), inches: 22 1/2 x 28 x 18 1/2 (47 1/2 H with stand, 46 3/4 H with cabinet)
Shipping weight, pounds: 95 (121 with stand, 190 with cabinet)
TRIUMPH 4300
Cutting width, inches 16 7/8 Cutting height, inches 3/4 Narrow cut, inches 1 1/2 Length behind blade, inches 13 3/8
Triumph 4300 Spec Sheet
Shipping weight, pounds: 95 (121 with stand, 190 with cabinet)
TRIUMPH 4300
Cutting width, inches 16 7/8 Cutting height, inches 3/4 Narrow cut, inches 1 1/2 Length behind blade, inches 13 3/8
Triumph 4300 Spec Sheet
|
|
SCS safety features: hinged, transparent safety guard on front table (locks automatically while cutting); transparent safety cover on rear table; safety catch (locks blade lever in up position); blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Spindle-guided back gauge with calibrated crank and measurement scale. Patented, lever-activated, fast-action clamp. Precision side guide with measurement scale (mm / inches). High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Optional stand (shown above), or cabinet with storage shelves. UL and C UL approved. |
Dimensions (D x W x H), inches: 34 5/8 x 34 5/8 x 15 3/4 (45 1/4 H with stand, 44 H with cabinet) Shipping weight, pounds: 115 (141 with stand, 210 with cabinet)
TRIUMPH 4305
Cutting width, inches 16 7/8 Cutting height, inches 1 1/2 Narrow cut, inches 1 5/16 Length behind blade, inches 17
Triumph 4305 Spec Sheet
TRIUMPH 4305
Cutting width, inches 16 7/8 Cutting height, inches 1 1/2 Narrow cut, inches 1 5/16 Length behind blade, inches 17
Triumph 4305 Spec Sheet
|
The Formax Cut-True 15M Manual Paper Cutter features a hardened steel blade to easily slice through paper stacks up to 2.36” high. Its Guillotine blade and LED Laser Line combine to offer precision cutting with minimal effort. Simply load a stack of paper, up to 16.9” wide, secure with the geared clamp, and pull down on the lever arm; it’s that easy.
Using the spindle-guided back gauge and calibrated scales, operators can make fine adjustments, while the Laser Line shows exactly where to cut. In addition to accuracy, the Cut-True 15M has a range of safety features including front and rear transparent covers, blade lock, external blade depth adjustment, easy blade change access from the front of the cutter, and a wooden paper push for safe alignment. |
|
This compact model also includes a rugged metal stand and feet for tabletop use. The Cut-True 15M is ideal for transforming brochures, invitations and more, with crisp, accurate cuts.
Formax Cut-True 15M Spec Sheet
Formax Cut-True 15M Spec Sheet
|
|
The Formax Cut-True 16M Manual Paper Cutter combines accuracy with ease-of-use in cutting paper up to 18.7” wide. With its hardened-steel Guillotine blade, and lever-activated blade arm, it has the capacity to cut through paper stacks up to 3.15” with razor-sharp precision.
Using the LED Laser Line, spindle-guided back gauge and calibrated scales, operators can make fine adjustments, and know exactly where to cut. In addition to accuracy, the Cut-True 16M ranks high in safety features including front and rear transparent covers, blade lock, external blade depth adjustment, easy blade change access from the front of the cutter, and a wooden paper push for safe alignment. |
It also includes a rugged metal stand for a comfortable working height, and feet for tabletop use.
The Cut-True 16M is ideal for transforming brochures, invitations and more, with crisp, professional cutting, and makes a great addition to print shops and in-plant finishing.
Formax Cut-True 16M Spec Sheet
The Cut-True 16M is ideal for transforming brochures, invitations and more, with crisp, professional cutting, and makes a great addition to print shops and in-plant finishing.
Formax Cut-True 16M Spec Sheet
|
SCS safety features: hinged, transparent safety guard on front table (locks automatically while cutting); transparent safety cover on rear table; safety catch (locks blade lever in up position); blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Spindle-guided back gauge with calibrated crank. Manual spindle clamp is guided on both sides to apply even pressure along entire cutting width. Front table measurement scale (mm / inches). High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Optional stand (shown above). UL and C UL approved. |
|
Dimensions (D x W x H), inches: 35 x 39 x 23 (50 H with stand) Shipping weight, pounds: 297 (320 with stand)
TRIUMPH 4705
Cutting width, inches 18 3/4 Cutting height, inches 2 3/4 Narrow cut, inches 1 3/16 Length behind blade, inches 18
Triumph 4705 Spec Sheet
TRIUMPH 4705
Cutting width, inches 18 3/4 Cutting height, inches 2 3/4 Narrow cut, inches 1 3/16 Length behind blade, inches 18
Triumph 4705 Spec Sheet
|
|
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; transparent, electronically controlled front safety guard; transparent safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Electric blade drive. Spindle-guided back gauge with calibrated crank. Front table digital display (cm or inches) for precise back gauge positioning. Bright, LED optical cutting line. Patented lever-activated, fast-action clamp. |
Precision side guide. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Optional stand (shown above), or cabinet with storage shelves. UL and C UL approved. Electrical requirements: 115 V, 60 Hz Motor output, horsepower: 0.6 Dimensions (D x W x H), inches: 34 1/4 x 25 x 14 (42 3/4 H with stand, 42 1/2 H with cabinet)
Shipping weight, pounds: 191 (217 with stand, 286 with cabinet)
TRIUMPH 4315
Cutting width, inches 16 7/8 Cutting height, inches 1 1/2 Narrow cut, inches 1 3/8 Length behind blade, inches 17
Triumph 4315 Spec Sheet
Shipping weight, pounds: 191 (217 with stand, 286 with cabinet)
TRIUMPH 4315
Cutting width, inches 16 7/8 Cutting height, inches 1 1/2 Narrow cut, inches 1 3/8 Length behind blade, inches 17
Triumph 4315 Spec Sheet
|
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; transparent, electronically controlled front safety guard; transparent safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Electric blade and clamp drive. Spindle-guided back gauge with calibrated crank. Front table digital display (cm or inches) for precise back gauge positioning. Bright, LED optical cutting line. Patented automatic clamp. Precision side guide. |
|
High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Optional stand (shown above), or cabinet with storage shelves. UL and C UL approved. Electrical requirements: 115 V, 60 Hz Motor output, horsepower: 0.6 Dimensions (D x W x H), inches: 34 1/4 x 25 x 14 (42 3/4 H with stand, 42 1/2 H with cabinet) Shipping weight, pounds: 200 (226 with stand, 295 with cabinet)
TRIUMPH 4350
Cutting width, inches 16 7/8 Cutting height, inches 1 1/2 Narrow cut, inches 1 3/8 Length behind blade, inches 17
Triumph 4350 Spec Sheet
TRIUMPH 4350
Cutting width, inches 16 7/8 Cutting height, inches 1 1/2 Narrow cut, inches 1 3/8 Length behind blade, inches 17
Triumph 4350 Spec Sheet
|
|
The Formax Cut-True 22S Semi-Automatic Electric Cutter offers precision cutting for paper stacks up to 16.9” wide. This semi-automatic cutter requires very little effort, thanks to its electronically-controlled two-button operation. Simply load a stack of paper, up to 1.77” high, secure with the geared clamp, and press the buttons to engage the hardened-steel Guillotine blade.
Accurate cutting is easy with its spindle-guided back gauge with LED digital readout and calibrated scales. Using these and the LED Laser Line, operators can make fine adjustments, and see exactly where the blade will cut. The 22S doesn’t sacrifice safety for accuracy. In fact, it features an electronically-controlled front safety cover, transparent rear cover, safety lock with key, blade lock, external blade depth adjustment, |
easy blade change access from the front of the cutter, and a wooden paper push for safe alignment. The rugged metal stand is included, providing a stable work surface, as well as feet for tabletop use.
The Cut-True 22S is ideal for transforming brochures, invitations and more, with crisp, accurate cuts, and makes a welcome addition to print shops and in-plant finishing operations.
Formax Cut-True 22S Spec Sheet
The Cut-True 22S is ideal for transforming brochures, invitations and more, with crisp, accurate cuts, and makes a welcome addition to print shops and in-plant finishing operations.
Formax Cut-True 22S Spec Sheet
|
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; transparent, electronically controlled front safety guard; safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Ergonomic, 37 inch working height. Electric blade drive. Spindle-guided back gauge with calibrated crank. Front table digital display (cm or inches) for precise back gauge positioning. Bright, LED optical cutting line. |
|
Adjustable back gauge with narrow separations and plastic gliders. Manual spindle clamp is guided on both sides to apply even pressure along entire cutting width. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Electrical requirements: 115 V, 60 Hz Motor output, horsepower: 1.5 Dimensions (D x W x H), inches: 41 1/2 x 30 x 55 1/2 (53 W with side tables) Shipping weight, pounds: 531 (552 with side tables)
TRIUMPH 4815
Cutting width, inches 18 5/8 Cutting height, inches 3 Narrow cut, inches 1 Length behind blade, inches 18
Triumph 4815 Spec Sheet
TRIUMPH 4815
Cutting width, inches 18 5/8 Cutting height, inches 3 Narrow cut, inches 1 Length behind blade, inches 18
Triumph 4815 Spec Sheet
|
|
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; transparent, electronically controlled front safety guard; safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Ergonomic, 37 inch working height. Electric blade and clamp drive. Spindle-guided back gauge with calibrated crank. Front table digital display (cm or inches) for precise back gauge positioning. Bright, LED optical cutting line. |
Adjustable back gauge with narrow separations and plastic gliders. Automatic clamp. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Electrical requirements: 115 V, 60 Hz (20 amp dedicated line required) Motor output, horsepower: 2 Dimensions (D x W x H), inches: 41 1/2 x 30 x 51 (53 W with side tables) Shipping weight, pounds: 556 (577 with side tables)
TRIUMPH 4850
Cutting width, inches 18 5/8 Cutting height, inches 3 Narrow cut, inches 1 Length behind blade, inches 18
Triumph 4850 Spec Sheet
TRIUMPH 4850
Cutting width, inches 18 5/8 Cutting height, inches 3 Narrow cut, inches 1 Length behind blade, inches 18
Triumph 4850 Spec Sheet
|
The Formax Cut-True 27S Semi-Automatic Electric Paper Cutter offers precision cutting for paper stacks up to 18.9” wide. User-friendly features include dual-button electronic operation, automatic paper clamp, and LED digital readout. Simply load a stack of paper, up to 3.15” high and press the clamp and blade buttons to engage the hardened-steel Guillotine blade. These features, combined with the bright red LED Cutting Line, allow operators to make fine adjustments and see exactly where the blade will cut.
Accuracy meets safety in the Cut-True 27S, with front and rear transparent safety guards, blade lock, safety lock with key, external blade depth adjustment, automatic blade return from any position, easy-to-use blade change safety tool, and a wooden paper push for safe alignment. |
|
The rugged metal stand is also included, providing a stable work surface, and a convenient shelf for additional storage. The Cut-True 27S Electric Cutter is ideal for transforming brochures, invitations and more, with crisp, accurate cuts, and makes a welcome addition to print shops and in-plant finishing operations.
Formax Cut-True 27S Spec Sheet
Formax Cut-True 27S Spec Sheet
|
|
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; transparent, electronically controlled front safety guard; safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Ergonomic, 37 inch working height. Electric blade and clamp drive. Electric back gauge drive with touchpad for easy programming. Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch. |
Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes. Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Bright, LED optical cutting line. Adjustable, spindle guided back gauge with narrow separations and plastic gliders. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Electrical requirements: 115 V, 60 Hz (20 amp dedicated line required) Motor output, horsepower: 2 Dimensions (D x W x H), inches: 44 x 33 7/8 x 51 (56 1/2 W with side tables) Shipping weight, pounds: 648 (669 with side tables)
TRIUMPH 5255
Cutting width, inches 20 3/8 Cutting height, inches 3 Narrow cut, inches 1 3/8 Length behind blade, inches 20 3/8
Triumph 5255 Spec Sheet
TRIUMPH 5255
Cutting width, inches 20 3/8 Cutting height, inches 3 Narrow cut, inches 1 3/8 Length behind blade, inches 20 3/8
Triumph 5255 Spec Sheet
|
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; IR light beam safety curtain on front table; safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Ergonomic, 37 inch working height. Electric blade and clamp drive. Electric back gauge drive with touchpad for easy programming. Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch. |
|
Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes. Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Bright, LED optical cutting line. 3-step, LED front table illumination. Adjustable, spindle guided back gauge with narrow separations and plastic gliders. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Electrical requirements: 115 V, 60 Hz (20 amp dedicated line required) Motor output, horsepower: 2 Dimensions (D x W x H), inches: 44 x 33 7/8 x 51 (56 1/2 W with side tables) Shipping weight, pounds: 657 (677 with side tables)
TRIUMPH 5260
Cutting width, inches 20 3/8 Cutting height, inches 3 Narrow cut, inches 1 3/8 Length behind blade, inches 20 3/8
Triumph 5260 Spec Sheet
TRIUMPH 5260
Cutting width, inches 20 3/8 Cutting height, inches 3 Narrow cut, inches 1 3/8 Length behind blade, inches 20 3/8
Triumph 5260 Spec Sheet
|
|
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; transparent, electronically controlled front safety guard; safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Ergonomic, 37 inch working height. Electric blade and clamp drive. Electric back gauge drive with touchpad for easy programming. Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch. |
Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes. Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Bright, LED optical cutting line. Adjustable, spindle guided back gauge with narrow separations and plastic gliders. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Electrical requirements: 115 V, 60 Hz (20 amp dedicated line required) Motor output, horsepower: 2 Dimensions (D x W x H), inches: 48 x 39 x 51 (61 1/2 W with side tables) Shipping weight, pounds: 772 (793 with side tables)
TRIUMPH 6655
Cutting width, inches 25 1/2 Cutting height, inches 3 Narrow cut, inches 1 Length behind blade, inches 24
Triumph 6655 Spec Sheet
TRIUMPH 6655
Cutting width, inches 25 1/2 Cutting height, inches 3 Narrow cut, inches 1 Length behind blade, inches 24
Triumph 6655 Spec Sheet
|
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; IR light beam safety curtain on front table; safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Ergonomic, 37 inch working height. Electric blade and clamp drive. Electric back gauge drive with touchpad for easy programming. Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch. |
|
Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes. Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Bright, LED optical cutting line. 3-step, LED front table illumination; Adjustable, spindle guided back gauge with narrow separations and plastic gliders. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Electrical requirements: 115 V, 60 Hz (20 amp dedicated line required) Motor output, horsepower: 2 Dimensions (D x W x H), inches: 48 x 39 x 51 (61 1/2 W with side tables) Shipping weight, pounds: 775 (796 with side tables)
TRIUMPH 6660
Cutting width, inches 25 1/2 Cutting height, inches 3 Narrow cut, inches 1 Length behind blade, inches 24
Triumph 6660 Spec Sheet
TRIUMPH 6660
Cutting width, inches 25 1/2 Cutting height, inches 3 Narrow cut, inches 1 Length behind blade, inches 24
Triumph 6660 Spec Sheet
|
|
The Formax Cut-True 29A Electric Guillotine Paper Cutter offers precision cutting for paper stacks up to 20.5” wide. User-friendly, intuitive features include a touchscreen control panel, automatically-adjusting back gauge and the capacity to program up to 100 jobs/100 cuts. An infrared light beam safety curtain provides safety and convenience as it shuts down operation if the light plane is interrupted.
Operation is simple: utilize the touchscreen control panel to program and select job settings, then load a stack of paper, up to 3.15” high. Set the back gauge using the touchscreen. The bright LED Cutting Line allows operators to see exactly where the blade will cut and make fine adjustments. |
Electronically-controlled two-hand operation engages the hardened steel blade for crisp, accurate cuts, every time.
Cutting accuracy is 0.1mm on paper stacks up to 80mm. The Cut-True 29A also features a special anti-friction surface with optional wide side tables, making it easier for operators to maneuver large paper stock. A false clamp is included to minimize the risk of marking sensitive paper stock or perfect bound books. In addition, the clamp can be removed to decrease the minimum cut length, and is easily stored within the machine.
Standard safety features include a lock with key, blade lock, external blade depth adjustment, automatic blade return from any position, easy-to-use blade change safety tool, and a wooden paper push for safe alignment.
The Cut-True 29A is ideal for transforming large sheets into brochures, invitations and more, with crisp, accurate cuts, and is a welcome addition to print shops and in-plant finishing operations.
True-Cut 29A Product Spec Sheet
Cutting accuracy is 0.1mm on paper stacks up to 80mm. The Cut-True 29A also features a special anti-friction surface with optional wide side tables, making it easier for operators to maneuver large paper stock. A false clamp is included to minimize the risk of marking sensitive paper stock or perfect bound books. In addition, the clamp can be removed to decrease the minimum cut length, and is easily stored within the machine.
Standard safety features include a lock with key, blade lock, external blade depth adjustment, automatic blade return from any position, easy-to-use blade change safety tool, and a wooden paper push for safe alignment.
The Cut-True 29A is ideal for transforming large sheets into brochures, invitations and more, with crisp, accurate cuts, and is a welcome addition to print shops and in-plant finishing operations.
True-Cut 29A Product Spec Sheet
|
The Formax Cut-True 29H Hydraulic Guillotine Paper Cutter offers precision cutting for paper stacks up to 20.5” wide. User-friendly, intuitive features include a touchscreen control panel, automatically-adjusting back gauge and the capacity to program up to 100 jobs/100 cuts. An infrared light beam safety curtain provides safety and convenience as it shuts down operation if the light plane is interrupted.
Operation is simple: utilize the touchscreen to program and select job settings, then load a stack of paper, up to 3.15” high. Set the back gauge using the touchscreen, then use the foot pedal pre-clamp to check the paper position. |
|
The bright LED Cutting Line allows operators to see exactly where the blade will cut and make fine adjustments. Electronically-controlled two-hand operation engages the hardened steel blade for crisp, accurate cuts, every time.
Cutting accuracy is 0.1mm on paper stacks up to 80mm. The Cut-True 29H also features a special anti-friction surface with optional wide side tables, making it easier for operators to maneuver large paper stock. The hydraulic clamp pressure is adjustable to give the best clamp possible for different paper weights and stack heights. A false clamp is included to minimize the risk of marking sensitive paper stock or perfect bound books. In addition, the clamp can be removed to decrease the minimum cut length, and stored within the machine. The Cut-True 29H also features an internal light to illuminate the cutting area.
Standard safety features include a lock with key, blade lock, external blade depth adjustment, automatic blade return from any position, easy-to-use blade change safety tool, and a wooden paper push for safe alignment.
The Cut-True 29H is ideal for transforming large sheets into brochures, invitations and more, with crisp, accurate cuts, and is a welcome addition to print shops and in-plant finishing operations.
True-Cut 29H Product Spec Sheet
Cutting accuracy is 0.1mm on paper stacks up to 80mm. The Cut-True 29H also features a special anti-friction surface with optional wide side tables, making it easier for operators to maneuver large paper stock. The hydraulic clamp pressure is adjustable to give the best clamp possible for different paper weights and stack heights. A false clamp is included to minimize the risk of marking sensitive paper stock or perfect bound books. In addition, the clamp can be removed to decrease the minimum cut length, and stored within the machine. The Cut-True 29H also features an internal light to illuminate the cutting area.
Standard safety features include a lock with key, blade lock, external blade depth adjustment, automatic blade return from any position, easy-to-use blade change safety tool, and a wooden paper push for safe alignment.
The Cut-True 29H is ideal for transforming large sheets into brochures, invitations and more, with crisp, accurate cuts, and is a welcome addition to print shops and in-plant finishing operations.
True-Cut 29H Product Spec Sheet
Triumph 5560
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; IR light beam safety curtain on front table; safety cover on rear table; lockable main switch; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Hydraulic blade and clamp drive. Foot pedal for pre-clamping. Electric back gauge drive with touchpad for easy programming. Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes. Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Clamp pressure is fully adjustable between 1,900 and 3,800 psi. False clamp plate. Bright, LED optical cutting line. Stainless steel work surface. High quality, German HSS blade. Precision swing cut blade movement. Aluminum blade carrier and clamp bar. Adjustable blade guides. All-metal construction. Mounted on casters. Includes easy-access tool holder and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Dimensions (D x W x H), inches: 55 x 42 x 54 (64 W with side tables) 5560 shipping weight, pounds: 970 (1,008 with side tables) 5560 LT shipping weight, pounds: 1,014 (1,052 with side tables)
TRIUMPH 5560 /5560 LT
Cutting width, inches 21 5/8 Cutting height, inches 3 3/4 (3 5/8 with false clamp) Narrow cut, inches 1 1/4 (2 3/8 with false clamp) Length behind blade, inches 22 7/16
Triumph 5560/5560LT Spec Sheet
Hydraulic blade and clamp drive. Foot pedal for pre-clamping. Electric back gauge drive with touchpad for easy programming. Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes. Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Clamp pressure is fully adjustable between 1,900 and 3,800 psi. False clamp plate. Bright, LED optical cutting line. Stainless steel work surface. High quality, German HSS blade. Precision swing cut blade movement. Aluminum blade carrier and clamp bar. Adjustable blade guides. All-metal construction. Mounted on casters. Includes easy-access tool holder and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Dimensions (D x W x H), inches: 55 x 42 x 54 (64 W with side tables) 5560 shipping weight, pounds: 970 (1,008 with side tables) 5560 LT shipping weight, pounds: 1,014 (1,052 with side tables)
TRIUMPH 5560 /5560 LT
Cutting width, inches 21 5/8 Cutting height, inches 3 3/4 (3 5/8 with false clamp) Narrow cut, inches 1 1/4 (2 3/8 with false clamp) Length behind blade, inches 22 7/16
Triumph 5560/5560LT Spec Sheet
Triumph 7260
Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; IR light beam safety curtain on front table; safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.
Hydraulic clamp drive. Foot pedal for pre-clamping. Electric back gauge drive with control module for easy programming. Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 9 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes. Memory keys for repeat cuts (manual) and quick setting of frequently needed measurements. Automatic SET function for reference measurement and paper EJECT function with and without program mode. DELETE and INSERT mode for correcting and modifying programs. Automatic correction in case of back gauge displacement. Push buttons for fast back gauge movement (forward and reverse). Integrated calculator. Self-diagnostic system with error indication on display. Electric blade drive with solid steel carrier and adjustable guides. Electronic hand wheel with variable speed control for manual back gauge setting. Clamp pressure is fully adjustable between 550 and 4,400 psi. False clamp plate with optical indicator. Bright, LED optical cutting line. Stainless steel work surface. Standard air tables (front and rear). High quality, German HSS blade. Precision swing cut blade movement. All-metal construction. Includes easy-access tool holder and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Dimensions (D x W x H), inches: 60 1/2 x 51 3/8 x 52 1/2 (63 D, 82 1/2 W with side tables) Shipping weight, pounds: 1,534 (1,622 with side tables)
TRIUMPH 7260
Cutting width, inches 28 Cutting height, inches 3 Narrow cut, inches 3/4 (3 1/2 with false clamp) Length behind blade, inches 28
Triumph 7260 Spec Sheet
Hydraulic clamp drive. Foot pedal for pre-clamping. Electric back gauge drive with control module for easy programming. Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 9 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes. Memory keys for repeat cuts (manual) and quick setting of frequently needed measurements. Automatic SET function for reference measurement and paper EJECT function with and without program mode. DELETE and INSERT mode for correcting and modifying programs. Automatic correction in case of back gauge displacement. Push buttons for fast back gauge movement (forward and reverse). Integrated calculator. Self-diagnostic system with error indication on display. Electric blade drive with solid steel carrier and adjustable guides. Electronic hand wheel with variable speed control for manual back gauge setting. Clamp pressure is fully adjustable between 550 and 4,400 psi. False clamp plate with optical indicator. Bright, LED optical cutting line. Stainless steel work surface. Standard air tables (front and rear). High quality, German HSS blade. Precision swing cut blade movement. All-metal construction. Includes easy-access tool holder and paper blocking tool. Optional side tables increase work surface. UL and C UL approved. Dimensions (D x W x H), inches: 60 1/2 x 51 3/8 x 52 1/2 (63 D, 82 1/2 W with side tables) Shipping weight, pounds: 1,534 (1,622 with side tables)
TRIUMPH 7260
Cutting width, inches 28 Cutting height, inches 3 Narrow cut, inches 3/4 (3 1/2 with false clamp) Length behind blade, inches 28
Triumph 7260 Spec Sheet